Layla Hybrid

Firmness is the single most common reason mattresses get returned, and it is the hardest thing to judge from a showroom or a spec page. A flippable bed converts a return into a chore: two people, ten minutes, no shipping labels.

Layla's two sides are genuinely different — we measure the soft side at about 4 and the firm at about 7. That is a wider gap than most 'dual-sided' beds and wide enough that it covers most sleeper types.

The practical caveat is weight. A queen Hybrid is around 120 lb. Plan the flip for a day when someone can help rather than assuming you can do it alone at midnight.

13 inches: a copper-infused, hex-quilted cover, then copper gel memory foam on the soft side, a convoluted airflow transition layer, the pocketed coil unit, then a thinner copper foam layer on the firm side, with a second cover face.

Copper is a conductor, so infusing it into memory foam gives the foam somewhere to move heat, addressing the standard memory foam complaint. It also has antimicrobial properties, which is a secondary benefit for allergy-prone sleepers.

Because there is no fixed base layer — both faces are sleeping surfaces — the bed is symmetric around the coil unit. That is also why a Layla Hybrid weighs more than a comparable one-sided hybrid.

Cooling: a 2.5°F surface-temperature rise after 60 minutes of loaded contact in our 68°F, 45% RH lab.

Edge support: 2.1 inches of compression under a 230 lb seated load at the perimeter.

Motion transfer: 0.1g peak with a 10 lb weight dropped 12" away.

Pressure relief: 31 mmHg peak shoulder pressure for a 165 lb side sleeper on an XSensor pad.

Response time: 1.2 seconds to fully rebound after release of a 25 lb compression.

Off-gassing: odor gone after 2 days in a sealed room with a trained sniff panel and a VOC sensor.

Durability: Pass on 30,000 cycles of our rolling load test (about eight years of nightly use).

Measured February 2026 under methodology v2.1.

Nights 1–14: our tester started on the soft side, moved to firm on night nine, and settled back on soft by week three — exactly the experiment the design is meant to enable.

Months 2–4: flipping every two months kept impressions from developing on either face, which is an underrated durability advantage of a two-sided bed.

Month 6: 0.25 inches of impression on the more-used face, and it visibly recovered after two weeks on the other side. Two-sided construction is the oldest durability trick in the industry and it still works.